CaltechTHESIS
  A Caltech Library Service

Fundamentals of Thermocapillary Sculpting of Liquid Nanofilms and Applications to Thin Film Micro-Optics

Citation

Fiedler, Kevin Robert (2017) Fundamentals of Thermocapillary Sculpting of Liquid Nanofilms and Applications to Thin Film Micro-Optics. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/Z92J68X1. https://resolver.caltech.edu/CaltechTHESIS:03062017-120100812

Abstract

This doctoral thesis describes experimental work conducted as part of ongoing efforts to identify and understand the source of linear instability in ultrathin liquid films subject to large variations in surface temperature along the air/liquid interface. Previous theoretical efforts by various groups have identified three possible physical mechanisms for instability, including an induced surface charge model, an acoustic phonon model, and a thermocapillary model. The observed instability manifests as the spontaneous formation of arrays of nano/microscale liquid protrusions arising from an initially flat nanofilm, whose organization is characterized by a distinct in-plane wavelength and associated out-of-plane growth rate. Although long range order is somewhat difficult to achieve due to thin film defects incurred during preparation, the instability tends toward hexagonal symmetry within periodic domains achieved for a geometry in which the nanofilm is held in close proximity to a cooled, proximate, parallel, and featureless substrate.

In this work, data obtained from a previous experimental setup is analyzed and it is shown how key improvements in image processing and analysis, coupled with more accurate finite element simulations of thermal profiles, lead to more accurate identification of the fastest growing unstable mode at early times. This fastest growing mode is governed by linear instability and exponential growth. This work was followed by re-examination of real time interference fringes using differential colorimetry to quantify the actual rate of growth of the fastest growing peaks within the protrusion arrays. These initial studies and lingering questions led to the introduction of a new and improved experimental setup, which was redesigned to yield larger and more reproducible data sets. Corresponding improvements to the image analysis process allowed for the measurement of both the wavelength and growth rate of the fastest growing mode simultaneously. These combined efforts establish that the dominant source of instability is attributable to large thermocapillary stresses. For the geometry in which the nanofilm surface is held in close proximity to a cooled and parallel substrate, the instability leads to a runaway process, characterized by exponential growth, in which the film is attracted to the cooled target until contact is achieved.

The second part of this thesis describes fabrication and characterization of microlens arrays and linear waveguide structures using a similar experimental setup. However, instead of relying on the native instability observed, formation and growth of liquid shapes and protrusions is triggered by pre-patterning the cooled substrate with a desired mask for replication. These preformed cooled patterns, held in close proximity to an initially flat liquid nanofilm, induce a strong non-linear response via consequent patterned thermocapillary stresses imposed along the air/liquid interface. Once the desired film shapes are achieved, the transverse thermal gradient is removed and the micro-optical components are affixed in place naturally by the resultant rapid solidification. The use of polymer nanofilms with low glass transition temperatures, such as polystyrene, facilitated rapid solidification, while providing good optical response. Surface characterization of the resulting micro-optical components was accomplished by scanning white light interferometry, which evidences formation of ultrasmooth surfaces ideal for optical applications. Finally, linear waveguides were created by this thermocapillary sculpting technique and their optical performance characterized. In conclusion, these measurements highlight the true source of instability in this geometry, and the fabrication demonstrations pave the way for harnessing this knowledge for the design and creation of novel micro-optical devices.

Item Type:Thesis (Dissertation (Ph.D.))
Subject Keywords:Fluid mechanics; Thermocapillary; Linear stability; Nanofilms; Micro-Optics; Microlens array; Waveguide
Degree Grantor:California Institute of Technology
Division:Physics, Mathematics and Astronomy
Major Option:Physics
Thesis Availability:Public (worldwide access)
Research Advisor(s):
  • Troian, Sandra M.
Thesis Committee:
  • Troian, Sandra M. (chair)
  • Politzer, Hugh David
  • Libbrecht, Kenneth George
  • Yu, Nan
Defense Date:5 May 2017
Non-Caltech Author Email:fiedlekr (AT) gmail.com
Funders:
Funding AgencyGrant Number
NASA Space Technology Research FellowshipNNX13AN41H
Record Number:CaltechTHESIS:03062017-120100812
Persistent URL:https://resolver.caltech.edu/CaltechTHESIS:03062017-120100812
DOI:10.7907/Z92J68X1
Related URLs:
URLURL TypeDescription
https://dx.doi.org/10.1063/1.4968575DOIPaper published in the Journal of Applied Physics upon which Chapter 3 is based.
ORCID:
AuthorORCID
Fiedler, Kevin Robert0000-0002-9656-7663
Default Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:10087
Collection:CaltechTHESIS
Deposited By: Kevin Fiedler
Deposited On:01 Jun 2017 22:52
Last Modified:09 Aug 2022 16:09

Thesis Files

[img]
Preview
PDF (complete thesis) - Final Version
See Usage Policy.

6MB
[img]
Preview
PDF (Front Matter) - Final Version
See Usage Policy.

235kB
[img]
Preview
PDF (Chapter 1) - Final Version
See Usage Policy.

207kB
[img]
Preview
PDF (Chapter 2) - Final Version
See Usage Policy.

337kB
[img]
Preview
PDF (Chapter 3) - Final Version
See Usage Policy.

1MB
[img]
Preview
PDF (Chapter 4) - Final Version
See Usage Policy.

581kB
[img]
Preview
PDF (Chapter 5) - Final Version
See Usage Policy.

1MB
[img]
Preview
PDF (Chapter 6) - Final Version
See Usage Policy.

1MB
[img]
Preview
PDF (Chapter 7) - Final Version
See Usage Policy.

1MB
[img]
Preview
PDF (Chapter 8) - Final Version
See Usage Policy.

140kB
[img]
Preview
PDF (Back Matter) - Final Version
See Usage Policy.

147kB
[img]
Preview
PDF (Appendix A) - Final Version
See Usage Policy.

259kB
[img]
Preview
PDF (Appendix B) - Final Version
See Usage Policy.

238kB

Repository Staff Only: item control page