CaltechTHESIS
  A Caltech Library Service

Structure and Stability of Buoyant Diffusion Flames

Citation

Fleming, Graham Christopher (1982) Structure and Stability of Buoyant Diffusion Flames. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/DVY5-MD93. https://resolver.caltech.edu/CaltechETD:etd-09152006-121855

Abstract

The structure and stability of the convecting fluid flow generated by a diffusion flame in gaseous reactants has been investigated. The flame extends vertically upwards from a solid horizontal boundary, and separates the fuel from the oxidizer which can be of a different density. Real fuels are modelled by choosing appropriate values for the density difference and stoichiometric ratio of the reaction.

A self-similar solution for the steady flow is obtained incorporating the Howarth transformation, which allows the large density variations inherent in the combustion of gases to be accommodated. The stoichiometric ratio and fuel/oxidizer density ratio are varied to examine their effects on the structure and flow properties of the flame.

An Orr-Sommerfeld equation governing the stability of buoyant flows is developed, incorporating all the variable density terms. Two different steady flows are studied, the symmetric flame (unit stoichiometry), and a flame with the stoichiometric ratio corresponding to methane burning in air. It was found that using the Boussinesq approximation which neglects density variations except for a buoyancy term is not applicable for the flame, and also introduced inaccuracy in the stability diagram for the buoyant plume. Although the flame bears a superficial similarity to the buoyant plume, the several differences cause a large difference in their stability. Empirically interpreting the stability diagrams to obtain an expected transition point gives ReT ≈ 250 for the flame compared to the less stable buoyant plume with ReT ≈ 140. A new unstable region consisting of waves with negative phase velocity but positive group velocity was found for both the buoyant flame and the buoyant plume.

The local analysis is inappropriate for disturbances with wavelengths long compared to the flame thickness, therefore an analysis treating the flame and associated plume as negligibly thin was undertaken. This showed that the primary cause of instability was centrifugal forces generated by the momentum flux following a curved path. Reasonably good agreement was obtained with the local analysis.

Item Type:Thesis (Dissertation (Ph.D.))
Subject Keywords:Applied Mechanics, buoyancy, diffusion, flame combustion
Degree Grantor:California Institute of Technology
Division:Engineering and Applied Science
Major Option:Applied Mechanics
Thesis Availability:Public (worldwide access)
Research Advisor(s):
  • Marble, Frank E.
Thesis Committee:
  • Marble, Frank E. (chair)
  • Kubota, Toshi
  • Cohen, Donald S.
  • Sternberg, Eli
  • Barnes, Charles A.
Defense Date:17 March 1982
Funders:
Funding AgencyGrant Number
Earle C. Anthony FellowshipUNSPECIFIED
Fulbright Travel GrantUNSPECIFIED
CaltechUNSPECIFIED
NASANAG 3-70
Department of Energy (DOE)EX-76-G-03-1305
National Bureau of StandardsG 8 9014
Record Number:CaltechETD:etd-09152006-121855
Persistent URL:https://resolver.caltech.edu/CaltechETD:etd-09152006-121855
DOI:10.7907/DVY5-MD93
Default Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:3553
Collection:CaltechTHESIS
Deposited By: Imported from ETD-db
Deposited On:05 Oct 2006
Last Modified:19 May 2020 01:05

Thesis Files

[img]
Preview
PDF - Final Version
See Usage Policy.

3MB

Repository Staff Only: item control page