Quasi-static optical parametric amplification
Abstract
High-gain optical parametric amplification is an important nonlinear process used both as a source of coherent infrared light and as a source of nonclassical light. In this work, we experimentally demonstrate an approach to optical parametric amplification that enables extremely large parametric gains with low energy requirements. In conventional nonlinear media driven by femtosecond pulses, multiple dispersion orders limit the effective interaction length available for parametric amplification. Here, we use the dispersion engineering available in periodically poled thin-film lithium niobate nanowaveguides to eliminate several dispersion orders at once. The result is a quasi-static process; the large peak intensity associated with a short pump pulse can provide gain to signal photons without undergoing pulse distortion or temporal walk-off. We characterize the parametric gain available in these waveguides using optical parametric generation, where vacuum fluctuations are amplified to macroscopic intensities. In the unsaturated regime, we observe parametric gains as large as 71 dB (118 dB/cm) spanning 1700–2700 nm with pump energies of only 4 pJ. When driven with pulse energies >10pJ, we observe saturated parametric gains as large as 88 dB (>146dB/cm). The devices shown here achieve saturated optical parametric generation with orders of magnitude less pulse energy than previous techniques.
Additional Information
© 2022 Optical Society of America under the terms of the OSA Open Access Publishing Agreement. Received 6 September 2021; revised 19 January 2022; accepted 4 February 2022 (Doc. ID 442550); published 1 March 2022. The authors wish to thank NTT Research for their financial and technical support. Part of this work was performed at the Stanford Nano Shared Facilities (SNSF) and the nano@Stanford labs, which are supported by the National Science Foundation as part of the National Nanotechnology Coordinated Infrastructure under award ECCS-2026822. Periodic poling was performed in the Stanford University Cell Sciences Imaging Core Facility (RRID:SCR_017787). Patterning and dry etching was performed at the Harvard University Center for Nanoscale Systems (CNS), a member of the National Nanotechnology Coordinated Infrastructure (NNCI) supported by the National Science Foundation. Facet preparation was done by Disco Hi-Tec America, Inc. The authors thank Edwin Ng for helpful discussions. Funding: National Science Foundation (NSF) (ECCS-1609688, EFMA-1741651, CCF-1918549); Army Research Laboratory (ARL) (W911NF-15-2-0060, W911NF-18-1-0285); Swiss National Science Foundation (SNSF) (P400P2-194369). Disclosures: MJ, NTT Physics and Informatics Lab (F,E), MJ, MMF, and CL, (P). Data availability: Data underlying the results presented in this paper are not publicly available at this time but may be obtained from the authors upon reasonable request.Attached Files
Published - optica-9-3-273.pdf
Submitted - 2104.07928.pdf
Supplemental Material - 5676829.pdf
Files
Additional details
- Alternative title
- Efficient Octave-Spanning Parametric Down-Conversion at the Picojoule Level
- Eprint ID
- 112697
- Resolver ID
- CaltechAUTHORS:20220104-233122850
- NTT Research
- NSF
- ECCS-2026822
- NSF
- ECCS-1609688
- NSF
- EFMA-1741651
- NSF
- CCF-1918549
- Army Research Laboratory
- W911NF-15-2-0060
- Army Research Office (ARO)
- W911NF-18-1-0285
- Swiss National Science Foundation (SNSF)
- P400P2-194369
- Created
-
2022-01-05Created from EPrint's datestamp field
- Updated
-
2022-04-08Created from EPrint's last_modified field