Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published August 9, 2021 | public
Journal Article

The GLINT South testbed for nulling interferometry with photonics: Design and on-sky results at the Anglo-Australian Telescope

Abstract

In 1978, Bracewell suggested the technique of nulling interferometry to directly image exoplanets which would enable characterisation of their surfaces, atmospheres, weather, and possibly determine their capacity to host life. The contrast needed to discriminate starlight reflected by a terrestrial-type planet from the glare of its host star lies at or beyond a forbidding 10⁻¹⁰ for an exo-Earth in the habitable zone around a Sun-like star at near-infrared wavelengths, necessitating instrumentation with extremely precise control of the light. Guided Light Interferometric Nulling Technology (GLINT) is a testbed for new photonic devices conceived to overcome the challenges posed by nulling interferometry. At its heart, GLINT employs a single-mode nulling photonic chip fabricated by direct-write technology to coherently combine starlight from an arbitrarily large telescope at 1 550 nm. It operates in combination with an actuated segmented mirror in a closed-loop control system, to produce and sustain a deep null throughout observations. The GLINT South prototype interfaces the 3.9-m Anglo-Australian Telescope and was tested on a sample of bright Mira variable stars. Successful and continuous starlight injection into the photonic chip was achieved. A statistical model of the data was constructed, enabling a data reduction algorithm to retrieve contrast ratios of about 10⁻³. As a byproduct of this analysis, stellar angular diameters that were below the telescope diffraction limit ( ~ 100 mas) were recovered with 1σ accuracy and shown to be in agreement with literature values despite working in the seeing-limited regime. GLINT South serves as a demonstration of the capability of direct-write photonic technology for achieving coherent, stable nulling of starlight, which will encourage further technological developments towards the goal of directly imaging exoplanets with future large ground based and space telescopes.

Additional Information

© The Author(s), 2021. Published by Cambridge University Press on behalf of the Astronomical Society of Australia. Received 14 September 2020; revised 11 June 2021; accepted 22 June 2021. Published online by Cambridge University Press: 09 August 2021. We acknowledge the traditional owners of the land on which this project took place: the Gadigal people of the Eora Nation and the Kamilaroi, the Wiradjuri, and the Weilwan people of the Warrumbungle. We recognise the violent dispossession they faced, and the continual violence the settler colony poses. This work was supported by the Australian Research Council Discovery Project DP180103413. It was performed in part at the OptoFab node of the Australian National Fabrication Facility utilising Commonwealth as well as NSW state government funding. S. Gross acknowledges funding through a Macquarie University Research Fellowship (9201300682) and the Australian Research Council Discovery Program (DE160100714). N. Cvetojevic acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement CoG—683029).

Additional details

Created:
August 20, 2023
Modified:
October 23, 2023