Application of an EMCCD camera for calibration of hard X-ray telescopes

Abstract

Recent technological innovations make it feasible to construct efficient hard x-ray telescopes for space-based astronomical missions. Focusing optics are capable of improving the sensitivity in the energy range above 10 keV by orders of magnitude compared to previously used instruments. The last decade has seen focusing optics developed for balloon experiments and they are implemented in approved space missions such as the Nuclear Spectroscopic Telescope Array (NuSTAR). The full characterization of x-ray optics for astrophysical missions, including measurement of the point spread function (PSF) as well as scattering and reflectivity properties of substrate coatings, requires a large area detector with very high spatial resolution and sensitivity, photon counting and energy discriminating capability. Novel back-thinned Electron Multiplying Charge-Coupled Devices (EMCCDs) are suitable detectors for ground-based calibrations if combined with a scintillating material. This optical coupling of the EMCCD chip to a microcolumnar CsI(Tl) scintillator can be achieved via a fiberoptic taper. Not only does this detector system exhibit low noise and high spatial resolution inherent to CCDs, but the EMCCD is also able to handle high frame rates. Additionally, thick CsI(Tl) yields high detection efficiency for x-rays. In this paper, we discuss the advantages of using an EMCCD to calibrate hard x-ray optics. We will illustrate the promising features of this detector solution using examples of data obtained during the ground calibration of the NuSTAR telescopes performed at Columbia University during 2010/2011. Finally, we give an outlook on latest development and optimizations.

Files

Additional details