Published September 1986
| public
Journal Article
Frictional Stress Evaluation along the Fiber-Matrix Interface in Ceramic Matrix Composites
- Creators
-
Faber, K. T.
- Advani, S. H.
- Lees, J. K.
- Jinn, J.-T.
Abstract
A finite element algorithm, developed for frictional contact problems, has been used to evaluate the shear stresses along the fiber-matrix interface in a ceramic composite and the load point fiber displacements dining fiber compression. The induced peak shear stress and the shear stress gradient were found to increase with increasing coefficients of friction. Calculated fiber displacements asymptotically decayed to the perfectly bonded condition as the coefficient of friction was increased. The computed average interfacial shear stress showed remarkable agreement with recent experimental findings hi the SiC-LAS system.
Additional Information
© 1986 The American Ceramic Society. Received April 2, 1986; approved May 19, 1986. Support for K.T. Faber supplied by the National Science Foundation under Grant No. DMR-8351476 in conjunction with IBM, Eastman Kodak, 3M Co., and Champion Spark Plug Co. The authors express their appreciation to Professor John Hirth for his suggestions. Computational facilities were provided by the IRCC at The Ohio State University.Additional details
- Eprint ID
- 49455
- DOI
- 10.1111/j.1151-2916.1986.tb07480.x
- Resolver ID
- CaltechAUTHORS:20140908-181331002
- DMR-8351476
- NSF
- IBM Corp.
- Eastman Kodak Corporation
- 3M
- Champion Spark Plug
- Created
-
2014-09-11Created from EPrint's datestamp field
- Updated
-
2021-11-10Created from EPrint's last_modified field