Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published April 1982 | Published
Journal Article Open

Strong-motion modeling of the Imperial Valley earthquake of 1979

Abstract

Twelve three-component strong-motion displacement records are modeled for the 1979 Imperial Valley earthquake to recover the distribution of slip on the Imperial fault plane. The final model, for which point source responses are calculated by a discrete wavenumber/finite element technique, uses a structure with gradients in material properties rather than layers. The effects of a velocity gradient are investigated by comparing synthetics with a layer-over-a-half-space model using generalized rays. It is shown that a uniform fault rupture model on a rectangular fault plane does not explain the data. The preferred fault model has slip concentrated below 5 km (in the basement material) and between the epicenter (5 km south of the international border) and Highway 80. Within this region, there appears to be two localized areas of larger dislocations; one just north of the border near Bonds Corner and a second under Interstate 8 at Meloland Overpass. A major arrival associated with large amplitude vertical accelerations (up to 1.7 g) is identified in the El Centro array records. This arrival has an S-P time of approximately 2.3 sec at many of the array stations and is modeled as originating from a localized source 8 km to the south of the array. The moment is estimated to be 5.0 × 10^(25) dyne-cm from the strong-motion records, which is consistent with teleseismic body-wave estimates. The preferred fault model is strike-slip with a 90° dip. The average strike is 143°. However to explain vertical waveforms near the fault trace, a corrugated or wiggly fault plane is introduced. The average rupture velocity is in the range 2.5 to 2.7 km-sec (0.8 to 0.9 times the basement shear-wave velocity). The preferred model has unilateral rupture propagation to the north, although the data would allow a small amount of propagation to the south. The estimated stress drop for the entire fault plane is only 5 to 10 bars; however, the stress drop over the more localized sources is about 200 bars. The fault model is consistent with the pattern of seismicity and observations of aseismic creep in the Imperial Valley and suggests that the southern half of the Imperial fault acts as a locked section which breaks periodically.

Additional Information

© 1982, by the Seismological Society of America. Manuscript received 24 August 1981. The authors benefited greatly from discussions with Tom Heaton. The finite-fault, Green's function summation program used was written by Tom Heaton. The authors are also grateful to Alan Olson for supplying a copy of his discrete wavenumber/finite element program (DWFE) David Harkrider assisted in programming the vertical component for DWFE Informative discussions were also had With Ralph Archuleta and Paul Spudich. The wording of the manuscript was significantly Improved by Tom Hanks and an anonymous reviewer This research was supported by the Earth Sciences Section, National Science Foundation Grant PFR 7921769.

Attached Files

Published - 571.full.pdf

Files

571.full.pdf
Files (1.2 MB)
Name Size Download all
md5:67099f9d7c73dc03630309a8cd758b67
1.2 MB Preview Download

Additional details

Created:
August 19, 2023
Modified:
October 17, 2023