Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published June 2014 | Published
Journal Article Open

Opposition control within the resolvent analysis framework

Abstract

This paper extends the resolvent analysis of McKeon & Sharma (J. Fluid Mech., vol. 658, 2010, pp. 336–382) to consider flow control techniques that employ linear control laws, focusing on opposition control (Choi, Moin & Kim, J. Fluid Mech., vol. 262, 1994, pp. 75–110) as an example. Under this formulation, the velocity field for turbulent pipe flow is decomposed into a series of highly amplified (rank-1) response modes, identified from a gain analysis of the Fourier-transformed Navier– Stokes equations. These rank-1 velocity responses represent propagating structures of given streamwise/spanwise wavelength and temporal frequency, whose wall-normal footprint depends on the phase speed of the mode. Opposition control, introduced via the boundary condition on wall-normal velocity, affects the amplification characteristics (and wall-normal structure) of these response modes; a decrease in gain indicates mode suppression, which leads to a decrease in the drag contribution from that mode. With basic assumptions, this rank-1 model reproduces trends observed in previous direct numerical simulation and large eddy simulation, without requiring high-performance computing facilities. Further, a wavenumber–frequency breakdown of control explains the deterioration of opposition control performance with increasing sensor elevation and Reynolds number. It is shown that slower-moving modes localized near the wall (i.e. attached modes) are suppressed by opposition control. Faster-moving detached modes, which are more energetic at higher Reynolds number and more likely to be detected by sensors far from the wall, are further amplified. These faster-moving modes require a phase lag between sensor and actuator velocity for suppression. Thus, the effectiveness of opposition control is determined by a trade-off between the modes detected by the sensor. However, it may be possible to develop control strategies optimized for individual modes. A brief exploration of such mode-optimized control suggests the potential for significant performance improvement.

Additional Information

© 2014 Cambridge University Press. (Received 20 September 2013; revised 12 February 2014; accepted 12 April 2014; first published online 19 May 2014) This material is based on work supported by the Air Force Office of Scientific Research under award FA9550-12-1-0469 (program manager Dr Douglas Smith).

Attached Files

Published - Luhar_2014p597.pdf

Files

Luhar_2014p597.pdf
Files (1.3 MB)
Name Size Download all
md5:b10482a79f1edd21191355fc6697ae93
1.3 MB Preview Download

Additional details

Created:
August 22, 2023
Modified:
October 26, 2023