Mechanical properties of wood-derived silicon carbide aluminum-alloy composites as a function of temperature

Abstract

The mechanical behavior [i.e., stiffness, strength, and toughness (K_(IC))] of SiC Al–Si–Mg metal–ceramic composites (50:50 by volume) was studied at temperatures ranging from 25 to 500 °C. The SiC phase was derived from wood precursors, which resulted in an interconnected anisotropic ceramic that constrained the pressure melt-infiltrated aluminum alloy. The composites were made using SiC derived from two woods (sapele and beech) and were studied in three orthogonal orientations. The mechanical properties and corresponding deformation micromechanisms were different in the longitudinal (LO) and transverse directions, but the influence of the precursor wood was small. The LO behavior was controlled by the rigid SiC preform and the load transfer from the metal to the ceramic. Moduli in this orientation were lower than the Halpin–Tsai predictions due to the nonlinear and nonparallel nature of the Al-filled pores. The LO K_(IC) agreed with the Ashby model for the K_(IC) contribution of ductile inclusions in a brittle ceramic.

Files

Additional details