Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published October 2012 | Submitted
Journal Article Open

Space-quality data from balloon-borne telescopes: the High Altitude Lensing Observatory (HALO)

Abstract

We present a method for attaining sub-arcsecond pointing stability during sub-orbital balloon flights, as designed for in the High Altitude Lensing Observatory (HALO) concept. The pointing method presented here has the potential to perform near-space quality optical astronomical imaging at ~1–2% of the cost of space-based missions. We also discuss an architecture that can achieve sufficient thermo-mechanical stability to match the pointing stability. This concept is motivated by advances in the development and testing of Ultra Long Duration Balloon (ULDB) flights which promise to allow observation campaigns lasting more than three months. The design incorporates a multi-stage pointing architecture comprising: a gondola coarse azimuth control system, a multi-axis nested gimbal frame structure with arcsecond stability, a telescope de-rotator to eliminate field rotation, and a fine guidance stage consisting of both a telescope mounted angular rate sensor and guide CCDs in the focal plane to drive a Fast-Steering Mirror. We discuss the results of pointing tests together with a preliminary thermo-mechanical analysis required for subarcsecond pointing at high altitude. Possible future applications in the areas of wide-field surveys and exoplanet searches are also discussed.

Additional Information

© 2012 Elsevier BV. Received 13 March 2012; Received in revised form 24 April 2012; Accepted 7 May 2012; Available online 2 June 2012. The authors thank to Joan Ervin, Roger Lee, Tanaz Mozafari, Barth Netterfield, Wes Traub, Chris Stoughton and David Pierce for work and discussions relating to the HALO concept. RJM acknowledges financial support through STFC Advanced Fellowship PP/E006450/1. The work of JR, BMD, JB, KL, PB, EJ, JA and CP was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration (NASA). EJ acknowledges the support of ORAU under contract with NASA.

Attached Files

Submitted - 1205.2957.pdf

Files

1205.2957.pdf
Files (1.8 MB)
Name Size Download all
md5:6c7f5e338952d6451447f56bedf4f717
1.8 MB Preview Download

Additional details

Created:
August 22, 2023
Modified:
October 20, 2023