Molecular Mixing and Flowfield Measurements in a Recirculating Shear Flow. Part II: Supersonic Flow

Abstract

Fundamental aspects of mixing between two gaseous streams in a complex geometry are studied and discussed. In the present paper, a supersonic top-stream is expanded over a 30° ramp, through which a secondary lower-stream is injected. The mass flux through the secondary stream is purposely insufficient to provide the entrainment requirements of the resulting shear layer, causing it to attach to the lower guidewall. Part of the shear layer fluid is directed upstream forming a recirculation zone, with enhanced mixing characteristics. The pressure coefficient of the device is quantified as a function of velocity ratio. The effect of heat release on the pressure coefficient is also reported. Molecular mixing was measured employing "flip" experiments based on the hypergolic hydrogen-fluorine chemical reaction. The amount of mixing for the expansion-ramp geometry is found to be higher than in classical free shear layers. However, as in free shear layers, the level of mixing decreases with increasing top-stream velocity. Results for a similar configuration with subsonic/transonic flow in the top stream are reported in Part I of this two-part series.

Additional details