CaltechTHESIS
  A Caltech Library Service

In vitro Fluid Dynamics of Prosthetic Aortic Heart Valves in Steady and Pulsatile Flow

Citation

Hanle, Daniel Dale (1984) In vitro Fluid Dynamics of Prosthetic Aortic Heart Valves in Steady and Pulsatile Flow. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/JC5A-5J46. https://resolver.caltech.edu/CaltechETD:etd-11092005-152937

Abstract

Velocity measurements were made in vitro using a laser-Doppler anemometer downstream from prosthetic aortic heart valves with distinctly different designs. The valves studied were an Ionescu-Shiley tri-leaflet bioprosthesis, a Björk-Shiley convexo-concave tilting-disc prosthesis, a Smeloff caged-ball prosthesis, and a St. Jude bi-leaflet prosthesis. Velocity measurements were made in steady and in pulsatile flow using a Newtonian fluid with a viscosity of 0.001 kg/ms. Velocity components in all three coordinate directions were measured at 305 locations distibuted systematically across a cross section of the flow system at an axial distance of 31.8 mm downstream from the valve mount. This systematic approach to the data acquisition allowed a detailed analysis of the disturbed flow fields generated by each of the four valves. Large shear stresses were estimated in the bulk flow which were potentially hemolytic and which could potentially activate platelet chemical-release reactions.

A well-controlled, comparative analysis of the steady-flow and pulsatile-flow velocity results revealed that measurements made in steady flow could be used to approximate the dynamics of pulsatile flow during the middle of the pulse cycle only. Shear stresses estimated for steady flow were found to be an upper bound on those estimated for pulsatile flow.

A comparison of the pressure-drop and regurgitant-flow characteristics of these four valves showed that there was a significant range in the hydrodynamic performance of these prostheses. The St. Jude prosthesis generated the lowest pressure drop among the four valves studied while the Smeloff prosthesis generated the largest. The St. Jude prosthesis also allowed the least amount of regurgitant flow of the three valve designs which, when closed, did not totally occlude their orifice for flow. Because it has a totally-occluding design, the lonescu-Shiley bioprosthesis allowed the least regurgitant flow of the valves studied. The Smeloff prosthesis allowed the largest amount of regurgitant flow of the valves studied.

Item Type:Thesis (Dissertation (Ph.D.))
Subject Keywords:Chemical Engineering
Degree Grantor:California Institute of Technology
Division:Chemistry and Chemical Engineering
Major Option:Chemical Engineering
Thesis Availability:Public (worldwide access)
Research Advisor(s):
  • Leal, L. Gary
Thesis Committee:
  • Shair, Fredrick H. (chair)
  • Herbolzheimer, Eric
  • Harrison, Earl C.
  • Leal, L. Gary
Defense Date:28 November 1983
Funders:
Funding AgencyGrant Number
Donald E. Baxter FoundationUNSPECIFIED
Children's Heart Foundation of Southern CaliforniaUNSPECIFIED
American Heart AssociationUNSPECIFIED
Record Number:CaltechETD:etd-11092005-152937
Persistent URL:https://resolver.caltech.edu/CaltechETD:etd-11092005-152937
DOI:10.7907/JC5A-5J46
Default Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:4473
Collection:CaltechTHESIS
Deposited By: Imported from ETD-db
Deposited On:09 Nov 2005
Last Modified:21 Dec 2019 01:41

Thesis Files

[img]
Preview
PDF (Hanle_dd_1984.pdf) - Final Version
See Usage Policy.

20MB

Repository Staff Only: item control page