CaltechTHESIS
  A Caltech Library Service

Photonic Crystal Structures for Efficient Localization or Extraction of Light

Citation

Vučković, Jelena (2002) Photonic Crystal Structures for Efficient Localization or Extraction of Light. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/VDXC-S449. https://resolver.caltech.edu/CaltechETD:etd-08252004-130544

Abstract

Three-dimensional (3D) photonic crystals offer the opportunity of light manipulation in all directions in space, but they are very difficult to fabricate. On the other hand, planar photonic crystals are much simpler to make, but they exhibit only a "quasi-3D" confinement, resulting from the combined action of 2D photonic crystal and internal reflection. The imperfect confinement in the third dimension produces some unwanted out-of-plane loss, which is usually a limiting factor in performance of these structures. This thesis proposes how to fully take advantage of the relatively simple fabrication of planar photonic crystals, by addressing a problem of loss-reduction.

One of the greatest challenges in photonics is a construction of optical microcavities with small mode volumes and large quality factors, for efficient localization of light. Beside standard applications of these structures (such as lasers or filters), they can potentially be used for cavity QED experiments, or as building blocks for quantum networks. This work also presents the design and fabrication of optical microcavities based on planar photonic crystals, with mode volumes of the order of one half of cubic wavelength of light (measured in material) and with Q factors predicted to be even larger than 10000.

In addition to photonic crystals fabricated in semiconductors, we also address interesting properties of metallic photonic crystals and present our theoretical and experimental work on using them to improve the output of light emissive devices.

Feature sizes of structures presented here are below those achievable by photolithography. Therefore, a high resolution lithography is necessary for their fabrication. The presently used e-beam writing techniques suffer from limitations in speed and wafer throughput, and they represent a huge obstacle to commercialization of photonic crystals. Our preliminary work on electron beam projection lithography, the technique that could provide us with the speed of photolithography and the resolution of e-beam writing, is also discussed in this thesis.

Item Type:Thesis (Dissertation (Ph.D.))
Subject Keywords:light-emitting diodes; nanofabrication; optical microcavities; photonic crystals; surface plasmons
Degree Grantor:California Institute of Technology
Division:Engineering and Applied Science
Major Option:Electrical Engineering
Thesis Availability:Public (worldwide access)
Research Advisor(s):
  • Scherer, Axel
Thesis Committee:
  • Scherer, Axel (chair)
  • Yariv, Amnon
  • Atwater, Harry Albert
  • Mabuchi, Hideo
  • Yamamoto, Yoshihisa
Defense Date:3 October 2001
Record Number:CaltechETD:etd-08252004-130544
Persistent URL:https://resolver.caltech.edu/CaltechETD:etd-08252004-130544
DOI:10.7907/VDXC-S449
ORCID:
AuthorORCID
Vučković, Jelena0000-0002-4603-9686
Default Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:3216
Collection:CaltechTHESIS
Deposited By: Imported from ETD-db
Deposited On:25 Aug 2004
Last Modified:23 Aug 2022 22:48

Thesis Files

[img]
Preview
PDF - Final Version
See Usage Policy.

52MB

Repository Staff Only: item control page