CaltechTHESIS
  A Caltech Library Service

Steady and Pulsatile Flow in a Glass Model of an Artery Bifurcation

Citation

Barudi, Samir Elias (1985) Steady and Pulsatile Flow in a Glass Model of an Artery Bifurcation. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/p655-8w88. https://resolver.caltech.edu/CaltechETD:etd-04142008-144909

Abstract

Velocity measurements were made in the downstream branch of a symmetric rigid glass model of an artery bifurcation for both steady and pulsatile flows. A laser Doppler anemometer was used to make the measurements. The symmetric model had a bifurcation angle of 90° and an area ratio (ratio of daughter tubes cross sectional area to mother tube cross sectional area) of 1.2. The Reynolds numbers based upon the upstream flow investigated for steady flow were 600, 1200, 1800, 2400 and 3000 with flow division percentages of 70%, 60%, 50%, 40%, 30% in the branch being studied. For pulsatile flow only a 50/50 division between daughter tubes was employed and the mother tube average Reynolds numbers (Reynolds number based on velocity averaged in time and space) used were 900 and 450. The Womersley parameter for the pulsatile flow studies was 33. Measurements of velocity versus time were also made for steady flow to allow for a better understanding of the nature of the unsteadiness in the flow just after the bifurcation.

This study shows the existence of secondary motions that play a very important role in the development of the flow and in the magnitude of shear stresses at the wall near the outside of the branch. The magnitude of these secondary velocities could reach up to 50% of average mother tube velocities. A small separation region near the outside wall is evident, from the steady flow data, that varies in size depending on the flow conditions present at the time. Helical motions are seen within this area. The velocity versus time plots for steady flows show very large fluctuations in the value of axial and vertical velocities near the outside part of the flow. These fluctuations can be as large as 500% of the value of the local average velocities, and thus show that even for steady flows very large fluctuations in the shear stress are present at the outside wall. No evidence was obtained to show that these fluctuations were periodic in nature. In pulsatile flow, the separation region plays a very dominant role during diastole and is not present during systole. The shear stresses for pulsatile flow at the inside wall are very high and unidirectional while at the outside wall they are oscillatory and low in absolute value.

Item Type:Thesis (Dissertation (Ph.D.))
Subject Keywords:Chemical Engineering
Degree Grantor:California Institute of Technology
Division:Chemistry and Chemical Engineering
Major Option:Chemical Engineering
Thesis Availability:Public (worldwide access)
Research Advisor(s):
  • Leal, L. Gary
Thesis Committee:
  • Herbolzheimer, Eric (chair)
  • Shair, Fredrick H.
  • Harrison, Earl C.
  • Leal, L. Gary
Defense Date:1 June 1984
Additional Information:Thesis title listed in 1985 Commencement Program varies from actual thesis: An Experimental Investigation of Steady and Pulsatile Flow in a Glass Model of an Artery Bifurcation.
Record Number:CaltechETD:etd-04142008-144909
Persistent URL:https://resolver.caltech.edu/CaltechETD:etd-04142008-144909
DOI:10.7907/p655-8w88
Default Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:1386
Collection:CaltechTHESIS
Deposited By: Imported from ETD-db
Deposited On:21 Apr 2008
Last Modified:16 Apr 2021 22:17

Thesis Files

[img]
Preview
PDF (Barudi_se_1985.pdf) - Final Version
See Usage Policy.

11MB

Repository Staff Only: item control page