CaltechTHESIS
  A Caltech Library Service

Stress Distribution in Two Intersecting Cylinders Under Pressure

Citation

Teig, Vernon Ellwood (1949) Stress Distribution in Two Intersecting Cylinders Under Pressure. Engineer's thesis, California Institute of Technology. doi:10.7907/9QC1-C818. https://resolver.caltech.edu/CaltechETD:etd-02272009-160414

Abstract

The experimental studies presented here were undertaken in an effort to determine the stress distribution in two circular cylinders intersecting at right angles and under internal pressure. The investigation was limited to tests of two specimens in the thick-walled cylinder range.

The experimental analysis led to the following conclusions:

1. The highest stress concentrations are located at an angle of about 14.5 degrees from the crotch centerline measured in the plane of the intersection.
2. The critical stress causing rupture is the tangential stress in the plane of the ellipse.
3. For the R/t ratios tested, the strength reduction as compared with a straight closed cylinder is approximately 50%.
4. It appears probable that bending effects for these thick-walled cylinders are of relatively minor importance.

Item Type:Thesis (Engineer's thesis)
Subject Keywords:Aeronautical engineering
Degree Grantor:California Institute of Technology
Division:Engineering and Applied Science
Major Option:Aeronautics
Thesis Availability:Public (worldwide access)
Research Advisor(s):
  • Sechler, Ernest Edwin
Group:GALCIT
Thesis Committee:
  • Unknown, Unknown
Defense Date:1 January 1949
Record Number:CaltechETD:etd-02272009-160414
Persistent URL:https://resolver.caltech.edu/CaltechETD:etd-02272009-160414
DOI:10.7907/9QC1-C818
Default Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:797
Collection:CaltechTHESIS
Deposited By: Imported from ETD-db
Deposited On:06 Mar 2009
Last Modified:30 Mar 2023 17:52

Thesis Files

[img]
Preview
PDF (Teig_ve_1949.pdf) - Final Version
See Usage Policy.

12MB

Repository Staff Only: item control page