Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published July 10, 2004 | public
Journal Article Open

Oblique particle-wall collisions in a liquid

Abstract

This paper presents experimental measurements of the approach and rebound of a particle colliding obliquely with a wall in a viscous fluid. Steel and glass particles 12.7 mm in diameter were used. The experiments were performed using a thick Zerodur wall (a glass-like material) with various mixtures of glycerol and water. Normal and tangential coefficients of restitution were defined from the ratios of the respective velocity components at the point of contact just prior to and after impact. These coefficients account for losses due to lubrication effects and inelasticity. A third parameter, a coefficient of sliding friction, provides a measure of the tangential force acting on the particle as it slides during a collision. Oblique collisions in a fluid are qualitatively similar to oblique collisions in a dry system, with a lowered friction coefficient dependent on surface roughness. For smooth surfaces the friction coefficient is drastically reduced due to lubrication effects. A theoretical model that takes into account the dependence of viscosity on pressure is proposed to explain the observed tangential force acting on a smooth sphere during an oblique collision. The model relies on an inferred uniform temperature increase within the lubrication layer, a consequence of viscous heating during impact. The tangential force felt by the particle is expressed as a friction coefficient dependent on the viscosity within the lubrication layer. The viscosity increases owing to pressure effects and decreases owing to thermal effects. For rough surfaces the friction coefficient is comparable to that measured in dry systems, since the surface asperities may interact with each other through the lubrication layer.

Additional Information

"Reprinted with the permission of Cambridge University Press." (Received 16 September 2003 and in revised form 10 February 2004). We are grateful to P. C. Jennings for providing the Zerodur block used in the present study. We also thank C. E. Brennen and R. Zenit for the many fruitful discussions leading up to the preparation of this paper. Some assistance in the lab was provided by A. Ruiz-Angulo and F.-L. Yang. This work was supported by the National Science Foundation under grant CTS-9908430.

Files

JOSjfm04a.pdf
Files (269.7 kB)
Name Size Download all
md5:0bfda68ac73a009f4bb473ccd82cb3e7
269.7 kB Preview Download

Additional details

Created:
August 22, 2023
Modified:
October 13, 2023