Toroidal Imploding Detonation Wave Initiator for Pulse Detonation Engines

Abstract

Imploding toroidal detonation waves were used to initiate detonations in propane–air and ethylene–air mixtures inside of a tube. The imploding wave was generated by an initiator consisting of an array of channels filled with acetylene–oxygen gas and ignited with a single spark. The initiator was designed as a low-drag initiator tube for use with pulse detonation engines. To detonate hydrocarbon–air mixtures, the initiator was overfilled so that some acetylene oxygen spilled into the tube. The overfill amount required to detonate propane air was less than 2% of the volume of the 1-m-long, 76-mm-diam tube. The energy necessary to create an implosion strong enough to detonate propane–air mixtures was estimated to be 13% more than that used by a typical initiator tube, although the initiator was also estimated to use less oxygen. Images and pressure traces show a regular, repeatable imploding wave that generates focal pressures in excess of 6 times the Chapman–Jouguet pressure.Atheoretical analysis of the imploding toroidal wave performed using Whitham's method was found to agree well with experimental data and showed that, unlike imploding cylindrical and spherical geometries, imploding toroids initially experience a period of diffraction before wave focusing occurs. A nonreacting numerical simulation was used to assist in the interpretation of the experimental data.

Files

Additional details