Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published July 29, 2016 | Published
Book Section - Chapter Open

Co-phasing primary mirror segments of an optical space telescope using a long stroke Zernike WFS

Abstract

Static Zernike phase-contrast plates have been used extensively in microscopy for half a century and, more recently, in optical telescopes for wavefront sensing. A dynamic Zernike wavefront sensor (WFS) with four phase shifts, for reducing error due to spurious light and eliminating other asynchronous noise, has been proposed for use in adaptive optics. Here, we propose adapting this method for co-phasing the primary mirror of a segmented space telescope. In order to extend the dynamic range of the WFS, which has a maximum range of +/ − λ/2, a phase- contrast plate with multiple steps, both positive and negative, has been developed such that errors as large as +/ − 10λ can be sensed. The manufacturing tolerances have been incorporated into simulations, which demonstrate that performance impacts are minimal. We show that the addition of this small optical plate along with a high precision linear translation stage at the prime focus of a telescope and pupil viewing capability can provide extremely accurate segment phasing with a simple white-light fringe fitting algorithm and a closed-loop controller. The original focal-plane geometry of a centro-symmetric phase shifting element is replaced with a much less constrained shape, such as a slot. Also, a dedicated pupil imager is not strictly required; an existing pupil sampler such as a Shack-Hartmann (SH) WFS can be used just as effectively, allowing simultaneous detection of wavefront errors using both intensity and spot positions on the SH-WFS. This could lead to an efficient synergy between Zernike and SH-WFS, enabling segment phasing in conjunction with high-dynamic range sensing.

Additional Information

© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE). This work was funded in part by the Spontaneous Research and Technology Development fund at the Jet Propulsion Laboratory. This work was partially carried out by the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

Attached Files

Published - 99046D.pdf

Files

99046D.pdf
Files (585.4 kB)
Name Size Download all
md5:adee7acc85ddb98baca5c371405bca3f
585.4 kB Preview Download

Additional details

Created:
August 20, 2023
Modified:
January 13, 2024