Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published February 2016 | Submitted + Published
Journal Article Open

Transient Dynamics of a Superconducting Nonlinear Oscillator

Abstract

We investigate the transient dynamics of a lumped-element oscillator based on a dc superconducting quantum interference device (SQUID). The SQUID is shunted with a capacitor, forming a nonlinear oscillator with a resonance frequency in the range of several gigahertz. The resonance frequency is varied by tuning the Josephson inductance of the SQUID with on-chip flux lines. We report measurements of decaying oscillations in the time domain following a brief excitation with a microwave pulse. The nonlinearity of the SQUID oscillator is probed by observing the ringdown response for different excitation amplitudes while the SQUID potential is varied by adjusting the flux bias. Simulations are performed on a model circuit by numerically solving the corresponding Langevin equations incorporating the SQUID potential at the experimental temperature and using parameters obtained from separate measurements characterizing the SQUID oscillator. Simulations are in good agreement with the experimental observations of the ringdowns as a function of applied magnetic flux and pulse amplitude. We observe a crossover between the occurrence of ringdowns close to resonance and adiabatic following at a larger detuning from the resonance. We also discuss the occurrence of phase jumps at a large amplitude drive. Finally, we briefly outline prospects for a readout scheme for superconducting flux qubits based on the discrimination between ringdown signals for different levels of magnetic flux coupled to the SQUID.

Additional Information

© 2016 American Physical Society. Received 28 April 2015; revised manuscript received 21 October 2015; published 1 February 2016. This work is supported by the DARPA/MTO QuEST program through a grant from AFOSR. P. G. and F. K. W. acknowledge support by NSERC, and F. K. W. also support by the European union through SCALEQIT. Device fabrication was performed at the Cornell NanoScale Facility, a member of the National Nanotechnology Coordinated Infrastructure (NNCI), which is supported by the National Science Foundation (Grant No. ECCS-15420819). P. G. thanks Chunqing Deng for a useful discussion on the Born-Oppenheimer approximation and Anthony J. Leggett for his helpful remarks regarding the applicability of our model.

Attached Files

Published - PhysRevApplied.5.024002.pdf

Submitted - 1504.06883v2.pdf

Files

1504.06883v2.pdf
Files (6.0 MB)
Name Size Download all
md5:140816acc67ac9908ca816439fb370d1
3.6 MB Preview Download
md5:39862b4b104a7e07bdc0e087507df332
2.4 MB Preview Download

Additional details

Created:
August 20, 2023
Modified:
October 17, 2023