Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published August 15, 1997 | public
Journal Article

Iron(III)-doped Q-sized TiO_2 coatings in a fiber-optic cable photochemical reactor

Abstract

The photochemical quantum efficiencies and oxidation performance of iron(III)-doped quantum-sized TiO_2 (Fe/Q-TiO_2), Degussa P25 (P25), and hybrid Fe/Q-TiO_2/P25 photocatalytic coatings are investigated using an optical fiber bundled array reactor. Fe/Q-TiO_2 coatings made from hydrosols of varying Fe/Q-TiO_2 content, 5–20 wt.%, a 13 wt.% P25 coating, and a hybrid, layered Fe/Q-TiO_2/P25 (5/13 wt.%) coating are tested. The light absorption efficiencies of the Fe/Q-TiO_2 coatings are inferior to the P25 coating, absorbing a maximum of only 80% of the input light compared with greater than 95% for P25 and 90% for the hybrid coating. The Fe/Q-TiO_2 coatings are found to increase the linear light transmission in a single optical fiber relative to P25 coated fibers by a factor of two owing to a reduced interfacial surface coverage of the photocatalyst particles on the quartz fiber. The hybrid coating does not significantly enhance linear light transmission. Slurry-phase photoefficiencies for the photooxidation of 4-chlorophenol for the Fe/Q-TiO_2 photocatalyst are found to be significantly lower than those measured for P25, φFe/Q-TiO_2 = 0.002 vs.φ_(P25) = 0.012. In addition, the length of the coated fiber-bundle used in our reactor is insufficient to capitalize on the increased light transmission for the Fe/Q-TiO_2 coating. Thus, we are unable to investigate the effect of increased light transmission on the photoefficiency of the system. Initial reaction rates for the photooxidation of 4-chlorophenol range from 2.0 to 4.5 μM h^(−1) generally increasing with increasing hydrosol Fe/Q-TiO2 content and an average relative quantum efficiency of φ_(Fe/Q-TiO2) = 0.004 ± 0.001 is observed. These values are significantly low compared with initial rates and relative quantum efficiencies of 18.0 μM h^(−1), and φFe/_(Q-TiO2/P25) = 0.011 and 20.4 μM h^(−1) and φ_(P25) = 0.012 for the hybrid and P25 coatings, respectively.

Additional Information

© 1997 Elsevier. Received 18 October 1996; accepted 2 January 1997. Available online 8 April 1998. We are grateful to ARPA and ONR (NAV 5 HFMN N000149J 1901 ) for financial support and to Tim Wu for their help in the lab, and Janet Kesselman, Scot T. Martin, and Wonyong Choi for scientific support. We would also like to thank 3M and Degussa for their donations of the optical fiber samples and the P25 photocatalyst, respectively.

Additional details

Created:
August 22, 2023
Modified:
October 23, 2023