Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published September 2013 | public
Journal Article

On a transitional and turbulent natural convection in spherical shells

Abstract

Laminar and turbulent natural convection inside concentric spherical shells with isothermal cold and hot boundaries is numerically investigated up to Rayleigh number values Ra ⩽ 10^(12) and Pr = 0.71. The study utilizes direct numerical simulation (DNS), large eddy simulation (LES) and Reynolds averaged Navier–Stokes (RANS) approaches for investigation of the laminar, transitional and fully developed turbulent flow regimes, respectively. Three-dimensional flow patterns for slightly supercritical oscillatory flow regime inside the shell, with internal/external diameter ratio equal to D_i/D_o = 0.714 are presented and may be potentially useful for verification of the future linear stability analysis results. Particular attention has been given to the complex, fully three-dimensional unsteady flows occurring in narrow shell geometries characterized by 0.85 ⩽ D_i/D_o ⩽ 0.95. For this geometry considerable deviations in predicted heat flux rate through the shell boundaries are observed when compared with existing heat transfer correlations for the entire range of Ra numbers. The deviations tend to increase for transitional and fully turbulent flows. A new correlation for the heat transfer rate is suggested for laminar and transitional flow regimes.

Additional Information

© 2013 Elsevier Ltd. Received 3 December 2012; Received in revised form 15 April 2013; Accepted 15 April 2013; Available online 21 May 2013. This research was funded by the Jet Propulsion Laboratory (JPL), California Institute of Technology, under a contract with the National Aeronautics and Space Administration. We are grateful to the JPL for a granted access to their supercomputer facilities. We are also thankful to Dr. Jeffrey Hall for his helpful inputs during this project.

Additional details

Created:
August 22, 2023
Modified:
October 24, 2023